Klarity SOLO Allows material to temporary bond when warm
Maximum resistance to stretch
Maximum rigidity.
Klarity SOLO is excellent for larger splints and orthoses, For the elbow, forearm, shoulder, lower extremity and trunk.
Resists fingerprinting and Self sealing edges.
RIGIDITY Moderately rigid splints.
If a more flexible splint is required, simply stretch the material to achieve the desired rigidity and thickness.
BONDING Traditional coating has a tacky surface that helps hold the splint in place during molding.
Pieces pinched together can be pulled apart once cooled. Use only dry heat and firm pressure to bond firmly; Use solvent to form a permanent bond.
SURFACE FINISH Resists fingerprinting for a smooth, shiny surface. To remove marks and bring out shine, DIP in warm water or lightly heat the surface with dry heat.
LATEX FREE Skin friendly without sensitization, and environment friendly with self-degration.
THICKNESSES: 1.6mm, 2.4mm, 3.2mm
COLORS: Black, Dark Blue, Blue, Red, Yellow
PERFORATIONS: Solid, 1%, 11%(micro), 12%, 19%
APPLICATIONS:
Klarity® Colors can be used to make a variety of orthoses, providing firm to lightweight support from the hand to the foot.
HEATING TIME & WORKING TIME
Heat in 70°C(160°F) water for 1-2 minutes. Klarity® Colors turn transparent when material is fully heated and ready to use.
The material normally sets in three to four minutes with a working time of one to two minutes, depending on thickness.
Klarity® Colors can be reheated and remolded as frequently as needed due to the 100% memory.
Audited Supplier 
){kind=link}
){kind=link}