Contour Pro - Superior conformability without stretching.
CHARACTERISTICS:
MEMORY Minimum memory when stretched.
Molded shape remains in place without any need to hold it while it cools. Splints will hold their shape
when mildly reheated.
RTS Minimum resistence to stretch.
When gently pulled, will not stretch or thin uncontrollably during the molding process.
DRAPE Moderate drape and excellent reproduction of detail with gentle handling. Superior conformability without stretching.
RIGIDITY Maximum rigidity. Splints will hold their shape against the pull of strong dynamic components and against hypertonicity.
BONDING Traditional coating has a light tack that holds the material in place. Use over bandages
with minimal adherence. Dry heating two surfaces will form a strong bond. For a permanent bond, use solvent or scrape off the coating. Dry heat and press together firmly.
SURFACE FINISH Resists fingerprints when handled lightly. Lightly heat and rub to remove marks.
Self-sealing cut edges remain smooth, closed and rounded even when reheated.
LATEX FREE Skin friendly without sensitization, and environment friendly with self-degration.
THICKNESSES: 2.4mm, 3.2mm
COLORS: Oyster
PERFORATIONS: Solid, 1%
APPLICATIONS:
Ideal for all upper extremity splints, bases for dynamic splints and positioning splints where an intimate fit is required. Makes great immobilization splints, especially for the hand, wrist and fingers.
Handle using light, smoothing strokes. Allow gravity to do the work. Once positioned, splints remain in place, needing only minimal contact to form. Ideal for sensitive joint or skin conditions or post-surgery.
HEATING TIME & WORKING TIME
Heat in 70°C(160°F) water for 1-2 minutes. Contour Pro normally sets in three to four minutes with a working time of one to two minutes, depending on thickness.
Audited Supplier 
){kind=link}
){kind=link}